Connect with us

Energy

NNPC to start drilling oil wells in Chad Basin in early 2017

Published

on

nnpc

The Group Managing Director of the Nigerian National Petroleum Corporation (NNPC), Dr. Maikanti Baru, has stated that following the acquisition and processing of over 1,900 square kilometres of new three-dimensional seismic in the Chad Basin, the corporation will commence drilling in early 2017 after evaluating the results collated from the interpretation of the data, ThisDay reports.

He said this in his keynote address delivered yesterday in Lagos at the 2016 conference of the Nigerian Association of Petroleum Explorationists (NAPE). Baru said the corporation would resume oil exploration activities in some of the inland basins, which include the Chad Basin and the Benue Trough because Nigeria’s neighbours in Niger and Chad had successful commercial discoveries of oil and gas within their portions of the Chad Basin and have since been producing from these fields.

“There is no need re-inventing the wheel. We are now progressing with the use of exploratory techniques that have worked on their own side of the Basin to prove up our side. This will also provide a vista for NAPE and its professionals to further analyse the concept of oil generation, expulsion and entrapment in rift basins which we now know is different from the Niger Delta Basin that we are used to,” he explained.

Continue Reading
1 Comment

1 Comment

  1. Dr. Jimmy Etti-Williams

    December 2, 2016 at 5:00 am

    This is a long overdue “great” news for Nigeria. Congratulations NNPC. Don’t give up, keep on keeping on. You get “A” for effort

Leave a Reply

Your email address will not be published. Required fields are marked *

Energy

NNPC, EGBIN To Boost Gas-To-Power, Energy Transition

Published

on

NNPC, The Nigerian National Petroleum Corporation and Egbin Power Plc have pledged to collaborate towards ensuring sustainable power supply and boosting Nigeria’s energy transition through optimisation of gas-to-power initiatives.

The Chief Operating Officer, Gas, NNPC, Yusuf Usman and Chairman, Board of Directors, Egbin Power Plc, Temitope Shonubi, announced both organisation’s commitment to transforming the power sector during a facility visit by the NNPC team to the power plant on Monday in Lagos.

Usman said the NNPC was committed to deepening gas utilisation in Nigeria, adding that the turn-around of Egbin Power post privatization was very impressive and indicative of the expertise and huge investment injected by the Sahara Group into transforming the thermal power plant.

“This visit has been an eye opener for me. We have seen turbines that have been running for over 40 years and still performing optimally through the efforts of Egbin management and employees to achieve a turnaround at the plant through overhaul of the entire system. This is a huge plus for the privatization exercise and positions Egbin to play a leading role as we work towards energy transition using gas which is a clean fuel that we have in abundance in Nigeria.”

Usman assured the power plant of the support of the NNPC, adding, “I have listened to the concerns you raised, particularly, regarding transmission restrictions. I am aware that works are ongoing in this regard to ensure that all the power we generate is safely evacuated.”

Shonubi said Egbin Power Plc had developed a robust strategy for its Phase Two investment expansion plan that is projected to add between 1,750 megawatts (MW) and 1,900MW to Nigeria’s power generation pool. He explained that Egbin’s operations were guided by an unwavering commitment to environmental sustainability. “We are mindful of our carbon footprint and continue to operate in compliance with global standards to ensure our energy is clean and our environment preserved for future generations.”

He noted that huge investments and consistent overhauls of the system had played a critical role in increasing its generation capacity “consistently and sustainably” since the plant was acquired in 2013.

He said: “Egbin has 1,320MW capacity. As of the time we took over, the plant was generating 300MW which is abysmal 22 percent. As of today, our generation capacity has surged, and we are doing 89 percent. We hit generation peak of 970MW this year despite challenges many thanks to expertise and dedication of our employees and support of our stakeholders. We are delighted at the tireless commitment of our employees to our vision of lighting up Nigeria and ultimately, Africa.”

Shonubi also acknowledged the support of stakeholders including the NNPC, Central Bank of Nigeria, the Power Ministry, Banks, Transmission Company of Nigeria, regulatory authorities, and the entire power sector, noting that multi-stakeholder collaboration remained critical to delivering uninterrupted power supply in Nigeria.

Source: Sahara

 

Download BAO E-MAGAZINE

Continue Reading

Energy

Power Supply Efficiency: Dangote Cement PLC Partner GE to Digitize Its Cement Plants to Boost Reliability

Published

on

GE’s APM Digital Solution Will Help Reduce Unplanned Downtime and Enhance Operational Performance

LAGOS, Nigeria, October 24, 2019- GE Will Modernize Seven GE LM6000PC Aeroderivative Gas Turbines and Install Its Asset Performance Management (APM) Digital Solution at Dangote Cement Plants in Obajana and Ibese, Nigeria;Contract Includes Service Agreement Extension for Additional 50,000 Operating Hours for Each of the Seven GE LM6000PC Aeroderivative Gas Turbines; GE’s APM Digital Solution Will Help Reduce Unplanned Downtime and Enhance Operational Performance; GE’s Total Plant Solutions Will Improve Power Supply Efficiency and Help Extend the Life of the Cement Plants

GE (NYSE: GE) and Africa’s leading cement producer Dangote Cement Plc signed an agreement to deploy GE’s Asset Performance Management (APM) digital solution to reduce unplanned downtime and enhance performance at its two cement plants in Obajana and Ibese, Nigeria. The project includes extending the current service agreement for an additional 50,000 operating hours for the seven GE LM6000PC aeroderivative gas turbines installed at the sites. GE’s total plant solutions will improve efficiency, reliability essential to continuous operations and the plants’ business strategy.

“Power supply is both a key input and a major cost in our manufacturing process,” said Ravi Sood, Operations Director, Dangote Cement Plc. “Operational performance is crucial to our cement plant’s overall productivity, directly affecting end products. Being at the front of cement production in Africa, we believe extending our services agreement with GE and the introduction of digital solutions will allow us to improve efficiencies, anticipate further reductions in unplanned downtime and become more self-sufficient in power production in a country which, with approximately 190 million inhabitants, is the most populous country in Africa and the seventh most populous country in the world.”

APM leverages cutting-edge technology to monitor the performance of power generation assets to reduce downtime, avoid turbines damage and remotely predict and resolve issues. APM sensors will be installed not only on the seven aeroderivative turbines, but also on their associated generators and gear boxes to predict and accurately diagnose issues with greater accuracy before they occur.

“Energy infrastructure is getting smarter, and digital solutions allow not only the shift from traditional calendar-based repairs to predictive maintenance, but they also increase power asset availability and reliability,” said Elisee Sezan, CEO for GE’s Gas Power businesses in sub–Saharan Africa. “We are proud to continue our 13-year collaboration with Dangote Cement to help them support Nigeria and other African countries towards achieving self-reliance and self-sufficiency in the world’s most basic commodities.”

Also Read: Serengeti Breweries Limited (SBL) marks growth milestone with a new corporate logo

The agreement underscores GE’s commitment to work collaboratively with its customers using the APM software to optimize their performance of assets, increase reliability and availability, minimize costs and reduce operational risks. Earlier this year, GE announced the first digital solutions order in sub-Saharan Africa for Azito in Ivory Coast  improving power plant output, reliability, availability and operational performance.

GE

Continue Reading

Energy

Cameroon: Three power plants financed by the African Development Bank to reduce power cuts

Published

on

Image credit: African Development Bank

For many years, Cameroon’s national electricity supply has been notoriously unreliable and subject to power cuts. The last significant electric system outage, which lasted eight hours, occurred last March and affected several of the country’s regions (the Far North, North, Littoral, Adamaoua, South and Centre regions).

However, three projects financed by the African Development Bank for $121.4 million in 2010-2011 are at last starting to provide long-suffering Cameroonians with much more reliable electricity.

Completion of work on transport lines, line maintenance and especially the replacement of wooden electricity transport poles with concrete poles are all part of the system improvements, whose goal is to increase the quality and reliability of public access to electricity.

The Lom Panga storage reservoir project is complete, but the dam’s generating plant is still under construction. In the meantime, two other power plants, Kribi and Dibamba, have begun working  to strengthen Cameroon’s generating capacity.

In November 2011, the African Development Bank awarded $62.9 million for the construction of Lom-Pangar, the hydroelectric generation’s ‘lungs’ in the country’s East region. The project included the construction of a reservoir (6 billion cubic meters of water retained) for regulating the Sanaga’s flow and optimising generation during low water periods at the Song Loulou plant (335 MW) and the Edea plant (224 MW). The production from these two plants has grown from 450 MW in 2011 to 729 MW now.

A 30 MW hydroelectric generating plant is under construction at the base of the dam. It will be linked to the Bertoua thermal plant by a 105 km 90kV line that should start to work in May 2021 following the installation of an evacuation station and the construction of its four turbines. Lom-Pangar will provide electricity to 150 locations in the region and will significantly reduce power cuts in the area.

“The Lom-Pangar dam will help save water in other reservoirs,” said Theodore Nsangou, the General Director of the Electricity Development Corporation (EDC), in an interview with a government publication in March 2018.

The 216 MW capacity Kribi gas-fired generating plant began to work in 2013 after receiving $32.8 million from the African Development Bank in July 2011 for an expansion project. Its production goal is 330 MW. Currently, the power plant has a 100 km 225 kV transport line connecting it with the Magombe substation in the Edea region in the country’s South region. The plant operates with natural gas (with light fuel oil as emergency backup) from the Sagana South offshore gas field.

During the dry season, the Kribi plant and its nine simple cycle gas turbines are truly the system’s “oxygen”, maintaining the country’s energy flow, particularly to the South’s interconnected system, which receives its electricity from Kribi.

The Kribi gas-fired generating plant and the Dibamba generating plant provide access to electricity for close to half of Cameroon’s population.

The Dibamba heavy fuel oil generating plant was also designed to meet the serious problem of power cuts during the dry season. It was the first of the three plants to receive financial support from the African Development Bank of $25.6 million in April 2010. Built to mitigate the country’s shortage of electricity, high demand quickly outpaced its capacity the day after it began operations.

Located in the outskirts of Douala, Cameroon’s second largest city, Dibamba is an 86 MW thermal generating plant with a 2 km 90 kV transport line linked to the network serving the most remote and densely populated areas in the country’s West region.

Also Read Interview: African Energy Chamber Executive Chairman, NJ Ayuk on Transforming Africa’s Energy Sector

With an estimated 23,000 MW hydroelectric production capacity, Cameroon has the second largest hydroelectric potential in Africa and the 18th largest worldwide. The country plans to complete the development of its hydroelectric industries by 2035. Construction of the Nachtigal hydroelectric generating plan began in 2019 and will be complete in about five years, with an estimated generating capacity of 420 MW.

The African Development Bank has awarded a funding package of $154.8 million for the completion of this generating plant. Other development partners, such as the World Bank, the European Investment Bank and Proparco, are also involved.

African Development Bank

Continue Reading

Ads

Most Viewed